Venous Blood Collection Tubes Manufacturer With CE ISO13485 0.5-10ml Glass Pet Tube
Blood collection tubes are designed with specific properties to ensure the accuracy and reliability of laboratory test results.
Some of the key properties of blood collection tubes include:
1. Additives: Blood collection tubes may contain various additives, such as anticoagulants or clot activators, to prevent clotting, preserve the sample, or enhance the performance of certain laboratory tests.
2. Color-coded stoppers: Blood collection tubes are often color-coded to indicate the type of additive or anticoagulant present in the tube. This helps to prevent errors and ensure that the correct tube is used for each test.
3. Sterility: Blood collection tubes must be sterile to prevent contamination of the sample and ensure accurate test results.
4. Vacuum seal: Blood collection tubes are typically designed with a vacuum seal to help draw the blood into the tube and ensure that the correct volume of blood is collected.
5. Material: Blood collection tubes are made from materials that are compatible with the sample being collected and the laboratory test being performed. For example, some tests require glass tubes, while others require plastic tubes.
6. Labeling: Blood collection tubes must be properly labeled with the patient's name, date and time of collection, and other relevant information to ensure traceability and prevent errors.
Specification
- Color Code: Red/Purple/Yellow/Blue/Black/Green/Gray
- Volume: 1-10ml
- Sizes: 13*75mm, 13*100mm, 16*100mm
- Material: Glass, PET(Plastic), PP
- Expiration: 2 years for glass tube, 1 year for PET tube
- Centrifuge: No centrifugation performed
- Inversion: 8 -10 times
- Clotting Time: Blood will not freeze
| Material |
Size |
Volume |
Cap Color |
Packing |
| PP |
8*45mm |
0.5-1ml |
Red/Purple/Yellow/Blue
/Black/Green/Gray
|
100pcs/tray, 1200/1800/3000pcs per carton
1million pcs a 20FT container
2million pcs a 40FT container
2.6milion pcs a 40HQ container
|
| Glass/PET |
13*75mm |
2-4ml |
| Glass/PET |
13*100mm |
5-7ml |
| Glass/PET |
16*100mm |
8-10ml |
PROCEDURES FOR USE
To use a blood collection tube, the healthcare provider typically follows these steps:
1. Clean the site where the blood will be drawn with an antiseptic solution.
2. Apply a tourniquet to the patient's arm to help locate a vein.
3. Insert the needle into the vein and allow the blood to flow into the tube until it is filled to the appropriate level.
4. Gently invert the tube several times to mix the blood with any additives in the tube.
5. Label the tube with the patient's name, date and time of collection, and any other relevant information.
6. Transport the tube to the laboratory for analysis, following any specific handling and transport instructions for the type of tube and laboratory test being performed.
Samples Preservation
1. Specimens should ideally be sent to the laboratory as soon as possible (via the next transport on the day of sample collection).
2. If samples cannot be sent to the laboratory on the day of collection (e.g. venepuncture performed after the last van pick-up):
• Biochemistry samples (lithium heparin and serum) should ideally be centrifuged and stored refrigerated (4-8°C)
• Biochemistry samples (fluoride oxalate) should not be centrifuged; these should be stored refrigerated (4-8°C)
• Haematology samples (EDTA and citrate) should not be centrifuged; these should be stored refrigerated (4-8°C)
• Urine samples (random ‘spot’ and 24-hour samples) should be stored refrigerated (4-8°C)
• If centrifugation facilities for Biochemistry samples do not exist within the surgery, Biochemistry blood samples may be stored refrigerated (4-8°C), but please be aware that the integrity of these samples will be compromised, resulting in spurious results, particularly (but not limited to) plasma sodium, potassium, phosphate, LDH.
FAQ
1. Are you factory or trading company?
We are a factory established in 2005 under the name of Jiangxi Exquisite(JINGZ) Technology Co.Ltd in Jiangxi Xiaolan Industrial Park, with full production line and medical approval certificates. YBK Medical is the subsidary company of JINGZ to supply better sales and service to customers.
2. How can I contact your company?
Email us at sales@ybkmed.cn or Whatsapp: 008615084880052. Welcome to visit our factory at Nanchang too.
3. Can I have a sample order?
Yes, free samples with freight collect.
4. Do you have an MOQ for blood tube and needle?
Yes, MOQ 12000pcs(10 cartons) for each size.
5. Is it ok to print our logo on label and packing carton?
Yes, we offer OEM/ODM service for our products.
