13*75mm Vacuum Blood Sample Collection Tube Edta Tube Gel Tube 1-10ml
A Vacuum blood collection tube is a sterile glass or plastic test tube with a colored rubber stopper creating a vacuum seal inside of the tube, facilitating the drawing of a predetermined volume of liquid.
Vacuum tubes may contain additives designed to stabilize and preserve the specimen prior to analytical testing.
Tubes are available with a safety-engineered stopper, with a variety of labeling options and draw volumes.
The color of the top indicates the additives in the vial.
Specification
- Color Code: Red/Purple/Yellow/Blue/Black/Green/Gray
- Volume: 1-10ml
- Sizes: 13*75mm, 13*100mm, 16*100mm
- Material: Glass, PET(Plastic), PP
- Expiration: 2 years for glass tube, 1 year for PET tube
- Centrifuge: No centrifugation performed
- Inversion: 8 -10 times
- Clotting Time: Blood will not freeze
| Material |
Size |
Volume |
Cap Color |
Packing |
| PP |
8*45mm |
0.5-1ml |
Red/Purple/Yellow/Blue
/Black/Green/Gray
|
100pcs/tray, 1200/1800/3000pcs per carton
1million pcs a 20FT container
2million pcs a 40FT container
2.6milion pcs a 40HQ container
|
| Glass/PET |
13*75mm |
2-4ml |
| Glass/PET |
13*100mm |
5-7ml |
| Glass/PET |
16*100mm |
8-10ml |
notice
1. The needle should vertically piercing in the middle of rubber stopper;
2. Don't move the rubber stopper;
3. Disposable only. Discard after use;
4. It is prohibited to use the tube which is contaminated;
5. To prevent blood spatter or avoid blood infection, the operators should weargloves and other protective devices;
PROCEDURES FOR USE
1. Check the tube;
2. Insert the blood collection needle into the vein after the skin disinfection;
3. Put the puncture needle into rubber stopper and the blood will automatically flow into the tube;
4. After the blood is collected to the calibration capacity, first pull out the IV needle on body, then pull off the tube.
5. Gently reverse the tube 5-8times after collection(except no additive tube).
STORAGE CONDITION
1. The vacuum blood collection tubes should be stored in cool dry place at 0℃-25℃;
2. The vacuum blood collection tubes shall be vertical and prohibited to invert.
Sending Samples to the Laboratory
1. Specimens should ideally be sent to the laboratory as soon as possible (via the next transport on the day of sample collection).
2. If samples cannot be sent to the laboratory on the day of collection (e.g. venepuncture performed after the last van pick-up):
• Biochemistry samples (lithium heparin and serum) should ideally be centrifuged and stored refrigerated (4-8°C)
• Biochemistry samples (fluoride oxalate) should not be centrifuged; these should be stored refrigerated (4-8°C)
• Haematology samples (EDTA and citrate) should not be centrifuged; these should be stored refrigerated (4-8°C)
• Urine samples (random ‘spot’ and 24-hour samples) should be stored refrigerated (4-8°C)
• If centrifugation facilities for Biochemistry samples do not exist within the surgery, Biochemistry blood samples may be stored refrigerated (4-8°C), but please be aware that the integrity of these samples will be compromised, resulting in spurious results, particularly (but not limited to) plasma sodium, potassium, phosphate, LDH.
These samples should be sent to the laboratory the next morning. They need to reach the laboratory within 24 hours of being taken. Do not freeze blood samples unless specifically advised by the laboratory to do so.
FAQ
1. Are you factory or trading company?
We are a factory established in 2005 under the name of Jiangxi Exquisite(JINGZ) Technology Co.Ltd in Jiangxi Xiaolan Industrial Park, with full production line and medical approval certificates. YBK Medical is the subsidary company of JINGZ to supply better sales and service to customers.
2. How can I contact your company?
Email us at sales@ybkmed.cn or Whatsapp: 008615084880052. Welcome to visit our factory at Nanchang too.
3. Can I have a sample order?
Yes, free samples with freight collect.
4. Do you have an MOQ for blood tube and needle?
Yes, MOQ 12000pcs(10 cartons) for each size.
5. Is it ok to print our logo on label and packing carton?
Yes, we offer OEM/ODM service for our products.
