Medical 4ml Gel Clot Activator Tube Vacuum Blood Collection Bottles13*75mm

INSTRCUTION FOR USE

1. Check the tube;

2. Insert the blood collection needle into the vein after the skin disinfection;

3. Insert the needle into the rubber stopper, and the blood will flow into the tube automatically;

4. After the blood is collected to the calibration capacity, first pull out the IV needle on body, then pull off the tube;

5. Gently reverse the tube 5-8times after collection(except no additive tube).

notice

1. The needle should vertically piercing in the middle of rubber stopper;

2. Don't moving the rubber stopper;

3. The test tube is turned upside down to activate the clotting; leave to stand for 20 to 30 minutes and then centrifugate for 10 minutes. If you need frozen serum, put the serum in a plastic bottle and freeze it. Do not freeze vacuum tubes.

4. Single use only. Discard after use;

5. It is prohibited to use the tube which are contaminated or have impurities in it;

6. Operators should wear gloves or other protective equipment to avoid blood spatter or to prevent blood infection;

STORAGE

1. Vacuum blood collection tubes shall be kept at 0 ℃ - 25 ℃ in a cool, dry place;

2. The vacuum blood collection tubes must be vertical and must not be inverted.